AISTech 2019 in Pittsburgh, Pennsylvania, USA

We are looking forward to meeting you in Pittsburgh at booth 1837!

DUMA-BANDZINK modernizes side trimmer and strip entry at ArcelorMittal Bremen

The modernization optimizes the strip entry and improves the cutting result.
The side trimmer has the following technical characteristics:

• Edge width min: 5mm
• Edge width max: 50mm per side
• Positioning accuracy cutting gap adjustment: +/- 0.05 mm
• Positioning accuracy Immersion depth control: – 0.02 mm

DUMA-BANDZINK’s 6th integrated solution is delivered to thyssenkrupp Steel in Finnentrop

By installing the integrated solution, the following goals could be realized:
• Reduce strip vibrations and minimize cross-bow effect (≥50%)
• Homogeneous surface layer
• Reduction of aluminum consumption

Baosteel signs LOI with DUMA-BANDZINK at the CIIE

The signed the pre-contract is about three galvanizing projects and one oiling machine, totaling in the high single-digit million range.

China International Import Expo 2018 in Shanghai

From 5th to 10th November 2018, the first China International Import Expo (CIIE) will be held at the National Exhibition and Convention Center in Shanghai. We are happy to welcome you there on booth 3A3-003!

EuroBLECH - 25th International Sheet Metal Working Technonology Exhibition, 23 - 26 October 2018 in Hanover, Germany

This year DUMA-BANDZINK GmbH will be represented together with its subsidiary AMTEC Kistler GmbH at booth G191 in hall 27. We are looking forward to meeting you!

Galvanizers Association, 110th Conference and Exposition

October 14-17th the Peabody Hotel in Memphis, Tennesse, will be the place to be this year. We are looking forward to meeting you on 15th October.

Aluminium 2018 in Düsseldorf

We are looking forward to meeting you at the joint Quality Alliance booth 9C35.

DUMA-BANDZINK modernizes side trimmer at Erdemir

The modernization also allows for higher bandwidths.

DUMA-BANDZINK purchases AMTEC Kistler GmbH

Due to this acquisition and incorporation of AMTEC Kistler, DUMA-BANDZINK is now a complete supplier in the field of oiling steel and aluminum from the production stage in the rolling mill through strip processing and up to further processing in the body pressing shop.

DUMA-BANDZINK delivers BASICJET- air knife system to Shandong Ruifeng

The new line will enable Ruifeng to coat 350,000 tons per year of cold strip for the construction and home appliances industries. The layer to be applied will be aluminum-zinc or zinc.

Aluminium China 2018 in Shanghai (11th to 13th of July 2018)

We are looking forward to meeting you at booth 1C27!

Quality Day 2018 – Increasing your Excellence

If you want to be part of these two inspiring days please let us know on short notice. The number of participants is limited.

Metal & Metallurgy China 2018 in Beijing

Asia’s largest exhibition in the metal and metallurgical industry – We are looking forward to meeting you!

AISTech 2018 in Philadelphia, USA

We are looking forward to meeting you at our booth 1925!

DUMA-BANDZINK equips a third galvanizing line of ArcelorMittal South Africa with a new air knife system and zinc pot equipment

DUMA-BANDZINK and SMS group Technical Services South Africa deliver together an additional new air knife system to further increase surface quality and drastically reduce zinc consumption.

DUMA-BANDZINK delivers two air-knife systems to ArcelorMittal South Africa

DUMA-BANDZINK and SMS group Technical Services South Africa deliver together two new air-knife systems to further increase surface quality and drastically reduce zinc consumption.

13th Blechexpo – International trade fair for sheet metal working

Visit us at our booth in Hall 9, Stand 9511

DUMA-BANDZINK delivers Micro-Oilingmachine thyssenkrupp Rasselstein

On an electrolytic galvanizing line the existing oiling mchine will be replaced by a micro-oiler from DUMA-BANDZINK.

Integrated Solution for hot-dip galvanizing line No. 3 at SSAB in Finland

The installation of a new DUMA BANDZINK Jet-Pro air knife system with EMG eMASS® strip stabilization – in the so-called “Integrated Solution” – will help to save zinc and improve the quality of the coating.

First integrated solution successfully commissioned

DUMA-BANDZINK and EMG eMASS® successfully commissioned first integrated solution at voestalpine.

5 Successful certifications

DUMA-BANDZINK does not only stand up for quality but also takes responsibility for safety, health and environmental as well as energy standards.

DUMA-BANDZINK among the TOP 50 of the largest machine and plant builders in the Lower Rhine region

DUMA-BANDZINK is one of the most important company’s in the branch “machinery and plant builders” in Lower Rhine region.

DUMA-BANDZINK and HOTANI enter into a partnership to offer Cleaning Sections for Strip Processing Lines

Both companies are looking forward to a successful partnership with the aim to provide an excellent solution to the European Steel Producers.

DUMA-BANDZINK GmbH becomes new partner of the “Quality Alliance”

DUMA-BANDZINK is glad to announce that since December 2016 they are official member of the “Quality Alliance”

Integrated Solution for thyssenkrupp

thyssenkrupp orders DUMA-BANDZINK air knife system including EMG eMass® strip stabilization.

ALUMINIUM 2016 - We Transform The World Of Aluminium

We are looking forward to meeting you! You will find us in Hall 9, Stand 9C20.

EuroBLECH - 24th International Sheet Metal Working Technonology Exhibition, 25 - 29 October 2016 in Hanover, Germany

We are looking forward to meeting you! You will find us in Hall 11, Stand B07/08

DUMA-BANDZINK sells 300th electrostatic oiling machine

Since 1982 DUMA-BANDZINK has been built electrostatic oiling machines for the steel industry.
In 1988 the first machine for the aluminum processing has been sold.

Galvanizers Association, 108th Conference and Exposition

The conference will be held from 23 to 26 October 2016 in Farmington, PA, USA.

DUMA-BANDZINK delivers electrostatic oiler for SkinPass machine at the Gunung Steel Group in Indonesia

The concept proposed by DUMA-BANDZINK was suitable and fits the most to customer’s requirements regarding qualities and strip speed.

OJSC Magnitogorsk Gipromez MMK Orders an Electrostatic Oiling Machine for a Longitudinal Divider for Strip Steel

In braking unit No. 8 of this Russian machine the previous oiling machine is being substituted by an electrostatic oiling machine from DUMA-BANDZINK GmbH.

Integrated Solution: DUMA-BANDZINK Air Knife with EMG eMASS® Strip Stabilizer

First reference order for the integrated solution of a DUMA Air-Knife combined with the eMASS® strip stabilization system from EMG Automation – for significant improvements in process and product quality.

New Workshop, New Machines - New Service Business

DUMA-BANDZINK celebrates new workshop opening at the SMS Businesspark City, Mönchengladbach, Germany

New location: Businesspark City Mönchengladbach

DUMA-BANDZINK with Substantial investment in machining and coating capacity to complement Repair Service Portfolio

While in the past DUMA-BANDZINK has had external service companies to offer grinding works and coatings for zinc pot rolls, furnace rolls (HDGL and CAL) and conductor rolls (EGL and ETL) primarily used in strip processing lines for the steel industry, the Mönchengladbach-based company is now installing their own grinding and coating capacities as an important addition to their product portfolio.

DUMA-BANDZINK GmbH Delivers 3rd Air Knife to NLMK / Russia

From NLMK AG, Pl. Metallurgov, Lipezk, Russia, DUMA-BANDZINK GmbH, Mönchengladbach, received the order to extend line 1 of the DUMA-BANDZINK galvanizing line with a third set of air knives.

DUMA-BANDZINK GmbH delivers 3rd Air Knive Set to AMEH

From ArcelorMittal Eisenhüttenstadt GmbH DUMA-BANDZINK GmbH, Mönchengladbach, Germany, received the order to supplement Galvanizing Line VZA2 (originally delivered by DUMA-BANDZINK with a third set of air knives.

DUMA-BANDZINK revamping ArcelorMittal Galvanizing Line Equipment in Sagunto, Spain for Usibor ALUSI® coating process.

From ArcelorMittal Espana, SA., DUMA-BANDZINK GmbH in Mönchengladbach, Germany, received the order to revamp the existing Air-Knife and Pot Hardware for the intended upgrade of the Galvanizing Line to produce Usibor Alusi® Coatings in Sagunto, Spain.

WISDRI Einöler

Electrostatic Oiling Machine for WISCO, Wuhan, PR China

From WISDRI Engineering & Research Incorporation Limited (short form „WISDRI“) DUMA-BANDZINK GmbH received an order for delivering a movable electrostatic oiling machine for Wuhan Iron and Steel Co. (short form “WISCO”).

New location: Businesspark City Mönchengladbach

Relocation of previous sites in Mönchengladbach

As from January 1, 2015, DUMA-BANDZINK GmbH will relocate its sites Industriestraße/Langenfeld and Theodor-Heuss-Straße/Duisburg at the new headquarter

SMS Businesspark City
Blumenberger Str. 143 – 145
D-41061 Mönchengladbach

DUMA-BANDZINK supplies tinning equipment to PR China

WSP GmbH, Aachen, has placed an order for delivery of tinning equipment for a Chinese customer with DUMA-BANDZINK GmbH, Duisburg/Langenfeld.

DUMA-BANDZINK GmbH rebuilds entry section of galvanizing line 3 at Finnentrop works of TKS

In the course of installation of a new welding machine ThyssenKrupp Steel Europe AG decided to rebuild the entry section of their galvanizing line #3 at Finnentrop works. Certain steel grades could not be thrusted safely via the existing equipment. Moreover, in future, steel grades of higher strength as well as austenitic and ferritic stainless steels should be processed.

Our website uses cookies to improve your experience. We'll assume you're ok with this, if you continue using this website. Learn More Accept